HERE IS HOW TO COPY ENTIRE GRIDS TO OTHER GRIDS

If you load the "Second Database", the first one remains on the first ten grids, instead of being replaced. This then gives you a total of 20 grids. The grids 11 thru 20 are for "copying from", and do not get loaded into the radio. What this enables you to do is load two different files, and by copying from grids 11 thru 20 to one of the first TEN grids, you can merge more than one file into a combined database that can then be loaded into the radio.

Here are the basic steps

- As an example
  read the radio back into Scancat and save that file
  as a "RSD" Personal database file

- If you want to rearrange it,

- you can copy the entire grid from one grid into another.

        To copy an entire grid do this:

        1 - click on the "TOP LEFT (Empty) gray square
          - This turns the entire grid "red" or "selected"
        2 - Press THE KEYBOARD COMBO OF "CTRL + C (Copy)
        3 - go to the "target grid
        4 - click on the "TOP LEFT (Empty) gray square
          - This turns the entire grid "red" or "selected"
        5 - Press THE KEYBOARD COMBO OF "CTRL + V (paste)

        EVERYTHING in the copied grid including button settings,
       is pasted into the selected target grid.

        THEN once you have the primary first ten grids organized
       there is an option
        Load File > SECOND Personal Database
        This loads a database in a completely new 2nd set of grids
        numbered 11 through 20
        
you can use the above 1-2-3-4-5 to copy one of IT"s grids.
And "merge" the extra databases banks with the one you send to the radio.

Then make sure you save that file before loading back to the radio.

jim