I think the PRO2054 has 50 per bank for 10 banks. I looked at our program set for the PRO-2054, and I see the 50th channel should be 50, not 100, etc etc (but) it's how we "paint" the numbers on the screen, not how it actually goes to the radio. ONE database "view" can change as a different radio is selected, and somewhere in the "code" we have messed up (but only a little bit) <GG>
If you come into the database grids with a Different radio selected, IT's numbering is on screen, then selecting a NEW radio may sometimes cause this.
To "refresh" the grid numbering, go back to opening Splash Screen and then right back by selecting Program Radio. Most times his fixes the Cosmetic problems. I agree the 50th is "numbered wrong", but that's the only one I see that "is".
I seem to have screwed up somewhere. when I look at my channel lists
in scancat for my Pro 2054, the banks and channels don't "line up"
correctly, IE: bank 1 lists channels 1 - 49, then 100 right after 49
in the channels collum in format "1" "2" in collum, all the other
banks list "CH#1" - "CH#31" all the way down to "CH#31" the Channel #
collum. after "CH#31" in each bank it goes to numbers in format "XXX"
with no letters just numbers.
the actual banks in the scanner are in 30 channel blocks. 1-30, 31-60 etc.
is this just a something the Pro-2054 does or did I screw up somewhere?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: